Like many other parts of machines and other appliances, the air compressor is prone to getting damage or no longer working properly. Whenever an air compressor is not working like it should, it will usually be time to get it repaired. Fortunately for property owners and those who use a lot of appliances, air compressors can be repaired. There are plenty of ways of how to repair air compressors. These include adjusting the flow of air, restoring power, locating the source of the damage and also disconnecting and replacing parts. These are often the best ways in repairing an air compressor.
ADJUST AIR FLOW
When looking to find out how to repair air compressors, one of the first things that you can do is adjust the airflow. In this situation, you can simply take the plastic cover off the top of the compressor by removing the screws. After completing this step, you will then just lift the cover off and get the screws off the pressure maintaining valve. The next things to do include turning the compressor on and off to check its setting and adjusting the pressure. You will then need to tighten the screws to raise the pressure and loosen the screws to lower pressure. It is important to check the pressure monitor to make sure that the compressor is working properly.
The next step in fixing an air compressor is to restore power. During this process, you will need to make sure that the compressor is plugged in and turned on. If the compressor won’t turn on, just hit the reset button. You will then need to check for a red or black button. Hit the button and then reset the circuit breaker. If power isn’t restored, you will then need to check if the cord is in good condition and completely plugged in. When the compressor doesn’t work, test the outlet.
When looking to repair an air compressor, you will also want to repair any leaks if necessary. Repairing leaks entails unplugging tools and hoses and then starting the compressor so that it can begin charging. Then you will want to mix up soapy water and spray and pour it around the fittings. It will be important to look for bubbles. If there are any bubbles, then you have a leak. The next things to do include turning the compressor off to release pressure from the tank, remove the fittings where bubbles formed, put the fittings back on and then testing it again.
LOCATE AIR COMPRESSOR UNLOADER VALVE
Anytime you are looking to repair an air compressor, you will need to locate the air compressor valve. It is usually located under the pressure switch. Once you locate the valve, you will then need to find out what type of unloader valve can be used for replacement.
UNPLUG THE DRAIN
You will also want to unplug and drain the air compressor. During this process, you will need to release the drain valve. Once releasing the drain valve, it will begin to depressurize the air compressor which will allow you to begin making any necessary repairs.
DISCONNECT AND REPLACE PART
The last step in repairing an air compressor is to disconnect it and replace the part. You will need to make sure that the compressor is safely turned off and depressurized. Once this step is completed, you will then need to remove the old valve and disconnect the wiring. It will then be time to install the new unloader valve and make sure that it is secured in tightly in place. You will then need to test the new unloader valve by turning the compressor on again.